XDVIK(1) USER COMMANDS XDVIK(1) NAME xdvi - DVI previewer for the X Window System SYNOPSIS xdvi [+[page]] [-s shrink] [-S density] [-p pixels] [-l] [-paper papertype] [-mgs[n] size] [-hushspecials] [-hushchars] [-hush] [-altfont font] [-margins dimen] [-sidemargin dimen] [-topmargin dimen] [-offsets dimen] [-xoffset dimen] [-yoffset dimen] [-keep] [-rv] [-fg color] [-bg color] [-hl color] [-bd color] [-cr color] [-bw width] [-noepsf] [-epsfgrey] [-maketexpk] [-mfmode mode] [-d ] [-geometry geometry] [-icongeometry geometry] [-iconic] [-display display] [-copy] [-thorough] [-expert] [-version] dvi_file[.dvi] In addition to using keystrokes to move within the file, xdvi provides buttons on the right side of the window, which are synonymous with various sequences of keystrokes. xdvi can display PostScript figures that have been included using the \epsffile or \psfig macros. If neither -noepsf nor -epsfgrey are given xdvi will fork ghostscript to generate bitmaps of PostScript figures and display the bitmaps. By default, EPS files are searched for along the TEXINPUTS path. xdvi can generate fonts at runtime via an external program, typically named MakeTeXPK. See the Kpathsea documentation for details. Whether it does this by default is a compile- time option, but the default can always be overridden. The dvi_file is tried first with the extension .dvi appended, then without. OPTIONS In addition to specifying the .dvi file (with or without the .dvi), xdvi supports the following command line options. If the option begins with a `+' instead of a `-', the option is restored to its default value. By default, these options can be set via the resource names given in parentheses in the description of each option. +page Specifies the first page to show. If + is given without a number, the last page is assumed; the first page is the default. -s shrink (.shrinkFactor) Defines the initial shrink factor. The default value is 3. -S density X Version 11 Last change: 26 February 1994 1 XDVIK(1) USER COMMANDS XDVIK(1) (.densityPercent) Determines the density used when shrinking bitmaps for fonts. A higher value produces a lighter font. The default value is 40. -density density Same as -S. -p pixels (.pixelsPerInch) Defines the base resolution of the fonts to use, in pixels per inch. The default value is 300. -altfont font (.altFont) Overrides cmr10 as the default font to use when the font in the dvi file cannot be found. -l (.listFonts) Causes the names of the fonts used to be listed. -hushspecials (.hushSpecials) Causes xdvi to suppress warnings about \special strings which it cannot process. -hushchars (.hushLostChars) Causes xdvi to suppress warnings about references to characters which are not defined in the font. -hush (.Hush) Causes xdvi to suppress all suppressable warnings. -rv (.reverseVideo) Causes the page to be displayed with white characters on a black background, instead of vice versa. -bw width (.borderWidth) Specifies the width of the border of the window. -borderwidth width Same as -bw. -fg color (.foreground) Determines the color of the text (foreground). -foreground color Same as -fg. -bg color (.background) Determines the color of the background. X Version 11 Last change: 26 February 1994 2 XDVIK(1) USER COMMANDS XDVIK(1) -background color Same as -bg. -hl color (.highlight) Determines the color of the page border. The default is the foreground color. -bd color (.borderColor) Determines the color of the window border. -bordercolor color Same as -bd. -cr color (.cursorColor) Determines the color of the cursor. The default is the color of the page border. -thorough (.thorough) Xdvi will usually try to ensure that overstrike characters (e.g. \notin) are printed correctly. On monochrome displays, this is always possible with one logical operation, either and or or. On color displays, however, this may take two operations, one to set the appropriate bits and one to clear other bits. If this is the case, then by default xdvi will instead use the copy operation, which does not handle overstriking correctly. The ``thorough'' option chooses the slower but more correct choice. See also -copy, below. -copy (.copy) Always use the copy operation when writing characters to the display. This option may be necessary for correct operation on a color display, but overstrike characters will be incorrect. -keep (.keepPosition) Sets a flag to indicate that xdvi should not move to the home position when moving to a new page. See also the `k' keystroke. -expert (.expert) Prevent the buttons from appearing. See also the `x' keystroke. -version Print information on the version of xdvi. -margins dimen (.Margin) Specifies the size of both the top margin and side margin. This should be a decimal number X Version 11 Last change: 26 February 1994 3 XDVIK(1) USER COMMANDS XDVIK(1) optionally followed by "cm", e.g., 1.5 or 3cm, giving a measurement in inches or centimeters. It determines the ``home'' position of the page within the window as follows. If the entire page fits in the window, then the margin settings are ignored. If, even after removing the margins from the left, right, top, and bottom, the page still cannot fit in the window, then the page is put in the window such that the top and left margins are hidden, and presumably the upper left-hand corner of the text on the page will be in the upper left-hand corner of the window. Otherwise, the text is centered in the window. See also `M' under the KEYSTROKES section. -sidemargin dimen (.sideMargin) Specifies the side margin (see above). -topmargin dimen (.topMargin) Specifies the top and bottom margins (see above). -offsets dimen (.Offset) Specifies the size of both the horizontal and vertical offsets of the output on the page. This should be a decimal number optionally followed by "cm", e.g., 1.5 or 3cm, giving a measurement in inches or centimeters. By decree of the Stanford TeX Project, the default TeX page origin is always 1 inch over and down from the top-left page corner, even when non- American paper sizes are used. Therefore, the default offsets are 1.0 inch. -xoffset dimen (.xOffset) Specifies the size of the horizontal offset of the output on the page (see above). -yoffset dimen (.yOffset) Specifies the size of the vertical offset of the output on the page (see above). -paper papertype (.paper) Specifies the size of the printed page. This may be of the form wxh (or wxhcm), where w is the width in inches (or cm) and h is the height in inches (or cm), respectively. There are also synonyms which may be used: us (8.5x11), usr (11x8.5), legal (8.5x14), foolscap (13.5x17), as well as the ISO sizes a1-a7, b1-b7, c1-c7, a1r-a7r (a1-a7 rotated), etc. The default size is 21 x 29.7 cm (A4 size). -mgs[n] size (.magnifierSize[n]) Specifies the size of the window to X Version 11 Last change: 26 February 1994 4 XDVIK(1) USER COMMANDS XDVIK(1) be used for the ``magnifying glass'' for Button n. See the MOUSE ACTIONS section. Defaults are 200, 350, 600, 900, and 1200. -mgs size Same as -mgs1. -geometry geometry (*geometry) Specifies the initial geometry of the window. -icongeometry geometry (.iconGeometry) Specifies the initial position for the icon. -iconic (.iconic) Causes the XDVI window to start in the iconic state. The default is to start with the window open. -display host:display Specifies the host and screen to be used for displaying the dvi file. This is normally obtained from the environment variable ``DISPLAY.'' -noepsf (.noEPSF) Causes xdvi to ignore \special strings that name PostScript files. -epsfgrey (.EPSFGrey) Causes xdvi to draw a grey rectangle where dvips would include a PostScript figure. +maketexpk (.maketexpk) Invoke MakeTeXPK to create missing fonts, regardless of the compile-time default. -maketexpk says not to invoke MakeTeXPK. -mfmodestring (.mfmode) Use string for the Metafont mode passed to MakeTeXPK. If this is not set, the `mfmode' resource is used. If that is not set, the environment variable MAKETEX_MODE is used. And if that is not set, a compile-time default (cx, unless it's been changed) is used. -debug (.debugLevel) Argument is a collection of bits specifying things to be verbose about. See the source file xdvi.h for the possible values. KEYSTROKES Xdvi recognizes the following keystrokes when typed in its X Version 11 Last change: 26 February 1994 5 XDVIK(1) USER COMMANDS XDVIK(1) window. Each may optionally be preceded by a (positive or negative) number, whose interpretation will depend on the particular keystroke. Also, the "Home", "Prior", "Next", and arrow cursor keys are synonyms for `^', `b', `f', `l', `r', `u', and `d' keys, respectively. q Quits the program. Control-C and control-D will do this, too. n Moves to the next page (or to the nth next page if a number is given). Synonyms are `f', Space, Return, and Line Feed. p Moves to the previous page (or back n pages). Synonyms are `b', control-H, and Delete. g,j Moves to the page with the given number. Initially, the first page is assumed to be page number 1, but this can be changed with the `P' keystroke, below. If no page number is given, then it goes to the last page. P ``This is page number n.'' This can be used to make the `g' keystroke refer to actual page numbers instead of absolute page numbers. Control-L Redisplays the current page. ^ Move to the ``home'' position of the page. This is normally the upper left-hand corner of the page, depending on the margins as described in the -margins option, above. u Moves up two thirds of a window-full. d Moves down two thirds of a window-full. l Moves left two thirds of a window-full. r Moves right two thirds of a window-full. c Moves the page so that the point currently beneath the cursor is moved to the middle of the window. It also (gasp!) warps the cursor to the same place. M Sets the margins so that the point currently under the cursor is the upper left-hand corner of the text in the page. Note that this command itself does not move the image at all. For details on how the margins are used, see the -margins option. s Changes the shrink factor to the given number. If no X Version 11 Last change: 26 February 1994 6 XDVIK(1) USER COMMANDS XDVIK(1) number is given, the smallest factor that makes the entire page fit in the window will be used. (Margins are ignored in this computation.) S Sets the density factor to be used when shrinking bitmaps. This should be a number between 0 and 100; higher numbers produce lighter characters. R Forces the dvi file to be reread. This allows you to preview many versions of the same file while running xdvi only once. k Normally when xdvi switches pages, it moves to the home position as well. The `k' keystroke toggles a `keep- position' flag which, when set, will keep the same position when moving between pages. Also `0k' and `1k' clear and set this flag, respectively. See also the -keep option. x Toggles expert mode (in which the buttons do not appear). Also `0x' and `1x' clear and reset this mode, respectively. See also the -expert option. MOUSE ACTIONS If the shrink factor is set to any number other than one, then clicking any mouse button will pop up a ``magnifying glass'' which shows the unshrunk image in the vicinity of the mouse click. This subwindow disappears when the mouse button is released. Different mouse buttons produce different sized windows, as indicated by the -mgs option. Moving the cursor while holding the button down will move the magnifying glass. Also, the scrollbars (if present) behave in the standard way: pushing Button 2 in a scrollbar moves the top or left edge of the scrollbar to that point and optionally drags it; pushing Button 1 moves the image up or right by an amount equal to the distance from the button press to the upper left-hand corner of the window; pushing Button 3 moves the image down or left by the same amount. ENVIRONMENT Uses the environment variable ``DISPLAY'' to specify which bit map display terminal to use. xdvi uses the same environment variables and algorithms for finding font files as TeX and its friends do. See the documentation for the Kpathsea library for details. (Repeating it here is too error-prone.) XDVIFONTS, if set, overrides all other font paths. X Version 11 Last change: 26 February 1994 7 XDVIK(1) USER COMMANDS XDVIK(1) XDVIMAKEPK, if set, overrides `MakeTeXPK' as the command to execute to create a PK file if one isn't found. The XDVISIZES variable may be set to indicate which sizes of fonts are available. It should consist of a list of numbers separated by colons. If the list begins with a colon, the system default sizes are used, as well. Sizes are expressed in dots per inch; decimals may be used for ``pxl'' files: for example, a 300 dots per inch file magnified by half a step comes out to 1643 dots per five inches, which should be encoded as 328.6. xdvi will also try the actual size of the font before trying any of the given sizes. Virtual fonts are also supported, although xdvi does not have any built-in device fonts to which they can refer, as dvips does. Virtual fonts are searched for first, to be consistent with dvips. MAKETEX_MODE specifies the Metafont mode for MakeTeXPK; see the -mfmode option above. FILES ~/.Xdefaults User-specific X resource defaults. SEE ALSO X(1), dvips(1), tex(1). AUTHORS Eric Cooper, CMU, did a version for direct output to a QVSS. Modified for X by Bob Scheifler, MIT Laboratory for Computer Science. Modified for X11 by Mark Eichin, MIT SIPB. Additional enhancements by many others. xdvik changes by kb@cs.umb.edu; email bug reports to tex-k@cs.umb.edu. X Version 11 Last change: 26 February 1994 8